Cleaning Shop - Sandblasting, Tumbling, Electropolishing and High Purity Cleaning

One of the unique aspects of Scientific Instrument Services is our ability to clean and finish parts to your specifications.  Since we are a scientific instrument based company, we are aware of the requirements of the scientific and medical markets for clean parts with fine finishes.  

SIs is unique in that we contain the following services in house.  By performing these services in house, we can reduce the time required to manufacture and finish your parts and it also give us greater contron over the finished product. 

Sandblasting

Sandblasting is utilized to clean small parts to remove residues or small burs.  It can also be used to even out a surface finish.  We use a variety of abrasives and grit sizes depending upon the material being cleaned.  Glass beads are frequently used on metal parts bur sometimes aluminum oxide is used for harder materials such as ceramics. Our shops contain several small sandblasters which are used with various grits of aluminum oxide or glass beads for the cleaning and polishing of finished components.  

Miniblaster is used to clean filaments and source metal parts

Tumbling

Tumbling is used to polish small parts as well as remove small burs.  We utilize a variety of materials with this system depending on the size and composition of the part that requires finishing. 

MFI Model 2000 Centrifugal Barrel Finishing System  - Tumbler for polishing and deburring parts

Electropolishing

Where a more polished finish is required we have in-house electropolishing capabilities for small lots of components.  This system will provide for additional cleaning of metal parts and provide for a smoother and brighter surface.

Molectrics Electro-Polishing System  

High Purity Ultrasonic Cleaning

The ultimate cleanliness of finished parts is of high importance to the scientific and medical markets.  Therefore we have installed a 4 station high purity, high temperature ultrasonic cleaning system in our facilities.  This system uses high purity filtered water at elevated temperatures along with ultrasonic cavitation to clean parts to the highest quality.  High temperature heating dries the parts without spots as a final step in the operation. 

Crest Heated Ultrasonic Wash Station  Equipped with DI rinse station and drying station  

Contacting our Customer Service Department--comments, questions, or anything can't find?

Call/e-mail/FAX us, or type your comments below.

Name/organization:
Email:		Phone/fax:

Regular business hours are 8:00 AM to 5:30 PM EST, M-F.

E-mail replies are normally expected within one business day.

PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL: WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551.